SurfaPore AG

 

Nanotechnology for protecting marble, porcelain surfaces and walls from graffiti staining

SurfaPore AG (Anti-Graffiti) can be easily applied on your existing or new surfaces to preserve their appearance, as it creates an impermeable and invisible barrier protecting from graffiti staining and permanent marker.

General Characteristics:

SurfaPore AG (Anti-Graffiti) is a water based graffiti  and permanent marker protectant. It contains nano-sized particles that penetrate into the pores of a surface that can accumulate graffiti, polymerize and create an impermeable network which binds permanently preventing paint to adhere to the surface. The surface must be cleaned with warm water and a stiff brush.

Application Surfaces:

Tiles, cladding, plaster walls, marble, porcelain tiles, stones.

Application Note:

The application surface should be dry and clean. No dilution is required. 2 applications of SurfaPore AG can be applied with brush, roller or spray gun on the existing vertical surfaces. For non-absorbing surfaces (shiny marbles, granite surfaces), remove any excess by using a damp absorptive towel or paper. Continue polishing the surface, until no apparent wet residue is visible on the surface. Absorbing surfaces (plaster, flamed stone) will absorb most of the applied SurfaPore AG. Ensure that there is no wet residue left after 5 minutes from application, by using a moist cloth. It is recommended to remove graffiti as soon as possible from the damaged surfaces. To achieve that you have to use a stiff brush and warm water, or alternatively a steam cleaner is ideally recommended. You have to re-apply SurfaPore AG after 5-7 graffiti removals for polished surfaces and 3-4 for other surfaces. Maximum effectiveness is achieved a week after application.

Consumption: Estimated consumption rate 24-30 m²/L for polished surfaces and 8-10 m²/L for other surfaces.